Smaller tumbler block shapes mean you can get more on a die, and that means you can cut the pieces for a quilt even faster!

$188.00

Compatibility:
  • Studio

Description

Die Specifications:
  • Compatible with Studio Fabric Cutter (AQ50800) only
  • Required: Super Long Cut Cutting Plastic (AQ60004) and Super Giant Die Tray (AQ406120)
  • Cuts eight 3 5/8″W x 3 1/2″H (9 cm x 9 cm) tumbler shapes
Suggested Uses:
  • AccuQuilt offers four tumbler block dies.
  • Smaller tumbler block shapes mean you can get more on a die, and that means you can cut the pieces for a quilt even faster!
  • The Tumbler Block is a cute baby quilt using pastels or brights
  • This block offers great options to clean out your stash of scraps
  • Use the Tumbler Block for a border

Storage: Store Studio dies in AccuQuilt die storage cases or storage racks.

Die Tips:
  • With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
  • Use cutting plastic that matches size of each die.
  • For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
  • Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
  • Some dies feature specially designed corners to aid in alignment and pre-cutting.
  • For fast applique, apply fusible web to fabrics, then cut shapes with dies.
  • Use good quality fabric to reduce fabric stretch.
  • It’s always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Additional information

Weight2.72 kg
Compatibility

Studio

Reviews

There are no reviews yet.

Be the first to review “Studio Tumbler-3 1/2″ (3″ Finished) Multiples”

Your email address will not be published. Required fields are marked *

* To conserve fabric, cover the only shape you want to cut - not the entire board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric side down if you want the shape to be a mirror image of the shape on the die.

Care and Maintenance:

Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It’s normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.

Warranty:

AccuQuilt GO! dies and Studio dies are guaranteed for one year.

0