First published in the 1920s under other names, this quilt design became popular in the 20s and 30s. As with other traditional designs, super-accurate cutting with AccuQuilt dies makes piecing a piece of cake.

Twenty plates form a circle. Use 5 plates for quarter circle fans.


In stock


Die Specifications:
  • Use die with Studio Fabric Cutter (AQ50800 or AQ50450) only
  • Required: Jumbo Cutting Plastic (AQ60002)
  • Cuts five 2 1/8″W x 5 1/4″H (5 cm x 13 cm) shapes (finished block requires 20 plates)
  • Die includes seam allowance and notches for easy piecing
  • Die coordinates with Circles-3 1/2″ (AQ50025)

Storage: Store Studio dies in AccuQuilt die storage cases or storage racks.

Die Tips:
  • With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
  • Use cutting plastic that matches size of each die.
  • For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
  • Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
  • Some dies feature specially designed corners to aid in alignment and pre-cutting.
  • For fast appliqué, apply fusible web to fabrics, then cut shapes with dies.
  • Use good quality fabric to reduce fabric stretch.
  • It’s always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Additional information

Weight1.25 kg


There are no reviews yet.

Be the first to review “Studio Dresden Plates-Pointed”

Your email address will not be published. Required fields are marked *

* To conserve fabric, cover the only shape you want to cut - not the entire board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric side down if you want the shape to be a mirror image of the shape on the die.

Care and Maintenance:

Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It’s normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.


AccuQuilt GO! dies and Studio dies are guaranteed for one year.