AccuQuilt’s Clear Cuts see-through dies allow quilters to easily position a cutout shape wherever desired on the fabric’s printed pattern. Create impressive designs using circles with printed medallions right in the center.

$94.00

Compatibility:
  • Studio

Description

Die Specifications:
  • Compatible with Studio Fabric Cutter (AQ50800) only
  • Required: Small Cutting Plastic (AQ60000)
  • Cuts one 2 3/4″ (7 cm) circle shape
Suggested Uses:
  • AccuQuilt’s Clear Cuts see-through dies allow quilters to easily position a cutout shape wherever desired on the fabric’s printed pattern.
  • Create impressive designs using circles with printed medallions right in the center.
  • Circles can be used for many different applications in quilting, appliqué circles as berries, buttons, eyes, flower centers, or polka dots.
  • Cut circles from wool to make penny rugs for table runners, candle mats, and dresser scarves.

Storage:Large (Small (S) Die Board: 5″ x 6″ (13 cm x 15 cm). Store Studio dies in AccuQuilt die storage cases or storage racks.

Die Tips:
  • With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
  • Use cutting plastic that matches size of each die.
  • For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
  • Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
  • Some dies feature specially designed corners to aid in alignment and pre-cutting.
  • For fast applique, apply fusible web to fabrics, then cut shapes with dies.
  • Use good quality fabric to reduce fabric stretch.
  • It’s always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Additional information

Weight0.4 kg
Compatibility

Studio

Reviews

There are no reviews yet.

Be the first to review “Studio Circle-2 3/4″ (Clear Cuts)”

Your email address will not be published. Required fields are marked *

* To conserve fabric, cover the only shape you want to cut - not the entire board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric side down if you want the shape to be a mirror image of the shape on the die.

Care and Maintenance:

Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It’s normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.

Warranty:

AccuQuilt GO! dies and Studio dies are guaranteed for one year.

0