Petals Block Of The Month 6

Petals is a Block Of The Month sampler quilt that has been exclusively designed to use with the Accuquilt GO! QUBE Mix & Match block sets. The great thing about the GO! QUBE Mix & Match sets is that while I’m using the 8” Block set and 8” Angles Companion set for my pattern sample, you could just as easily use any size QUBE that you have as the shape numbers are all the same! You will just need to adjust the size of your fabric cuts accordingly.

What makes the Petals BOM different from the two previous sampler quilts shared on the AccuQuilt blog is that these blocks are made at 150% the Qube size. That means that the finished quilt block will be 150% bigger than the size of the Qube set:

    6” Qube – 9” (finished) blocks – 45” x 45” quilt 8” Qube – 12” (finished) blocks – 60” x 60” quilt 9” Qube – 13.5” (finished) blocks – 67.5” x 67.5” quilt 10” Qube – 15” (finished) blocks – 75” x 75” quilt 12” Qube – 18” (finished) blocks – 90” x 90” quilt

I am making my quilt from a scrappy variety of Liberty fabrics within a specific colour palette. I recommend choosing about 10-12 fat quarters for your quilt top; you will need three prints per block. If you would like the centres of each block to be the same fabric, you will need 30cm of one print.

Quilt finishes at 60” x 60”; individual blocks should measure 12.5” x 12.5”.

Materials:

  1. AccuQuilt GO! Big, GO! Cutter or GO! Baby Cutter Fabric Starter Set
  2. AQ55776 GO! QUBE Mix & Match – 8” Block set
  3. AQ55789 GO! QUBE Mix & Match – 8” Companion set – Angles
  4. AQ55137 GO! Cutting Mat 6 x 6
  5. 10-12 fat quarters
  6. 3m background fabric
  7. 40cm binding fabric
  8. 1.65m x 1.65m backing fabric
  9. 1.6m x 1.6m batting
  10. Rotary mat, cutter and ruler
  11. General sewing equipment

Block 6 Materials:

  1. Shape 1 Square – 4” Finished
  2. Shape 2 Square – 2” Finished
  3. Shape 4 Quarter Square Triangle – 4” Finished
  4. Shape 5 Half Square Triangle – 2” Finished
  5. Shape 8 Rectangle – 2” x 4” finished
  6. 3 fat quarters
  7. 6” x WOF background fabric

Cutting Instructions:

  1. From print fat quarters:
    • Cut one 5” x 5” square
      • Using Shape 1, cut one Square
    • Cut one 5 ½” x 5 ½” square
      • Using Shape 2, cut four Squares
    • Cut one 5 ¾” x 5 ¾” square
      • Using Shape 4, cut four Quarter Square Triangles (QST)
    • Cut one 5” x 11” strip – Using Shape 8, cut four Rectangles
  2. From background fabric:
    • Cut one 3 ¾” x 12” rectangle
      • Using Shape 5, cut eight HSTs
    • Cut one 5 ½” x 5 ½” square
      • Using Shape 2, cut four Squares
    • Cut one 5” x 11” strip
      • Using Shape 8, cut four Rectangles

NOTE:Keep all remaining fabric/shapes as you may be able to use it later in the quilt.

Sewing Instructions:

NOTE: All seams are ¼“, (6mm), unless otherwise specified. Press seams open unless otherwise directed.

  1. Sew a print Square (Shape 2) to a background Square (Shape 2). Press. Sew a background Rectangle (Shape 8) to the top of the squares. Press seam toward the rectangle. Make four.
petals block 6
  1. Sew one background HST (Shape 5) to a print QST (Shape 4). Press. Sew another background HST (Shape 5) to the remaining edge to create a flying geese unit. Press. Make four.
Petals block 6 -2
  1. Sew a print rectangle (Shape 8) to the bottom edge of each flying geese unit from step 1. Press seams to the rectangle.
  2. Arrange the units to create the block layout, and sew into rows. Press seams open.
  3. Sew the rows together. Press seams open.

Congratulations on finishing Block 6 of Petals!

About the Author

Share this Article

One response to “Petals Block Of The Month 6

  1. Jacqueline Orth says:

    Really love the look of this block and the colours. Can’t wait to see the following ones.
    Just absolutely LOVE my AccuQuilt cutter, have so many of the dies and keep on collecting more 😁😁
    The best thing since sliced bread 👍👍😍

Leave a Reply

Your email address will not be published. Required fields are marked *