Petals Block Of The Month #2

Petals is a Block Of The Month sampler quilt that has been exclusively designed to use with the Accuquilt GO! QUBE Mix & Match block sets.
The great thing about the GO! QUBE Mix & Match sets is that while I’m using the 8” Block set and 8” Angles Companion set for my pattern sample, you could just as easily use any size QUBE that you have as the shape numbers are all the same! You will just need to adjust the size of your fabric cuts accordingly.

What makes the Petals BOM different from the two previous sampler quilts shared on the AccuQuilt blog is that these blocks are made at 150% the Qube size. That means that the finished quilt block will be 150% bigger than the size of the Qube set:

  • 6” Qube – 9” (finished) blocks – 45” x 45” quilt
  • 8” Qube – 12” (finished) blocks – 60” x 60” quilt
  • 9” Qube – 13.5” (finished) blocks – 67.5” x 67.5” quilt
  • 10” Qube – 15” (finished) blocks – 75” x 75” quilt
  • 12” Qube – 18” (finished) blocks – 90” x 90” quilt

I am making my quilt from a scrappy variety of Liberty fabrics within a specific colour palette. I recommend choosing about 10-12 fat quarters for your quilt top; you will need three prints per block. If you would like the centres of each block to be the same fabric, you will need 30cm of one print.

Quilt finishes at 60” x 60”; individual blocks should measure 12.5” x 12.5”.

Materials:

  1. AccuQuilt GO! Big, GO! Cutter or GO! Baby Cutter Fabric Starter Set
  2. AQ55776 GO! QUBE Mix & Match – 8” Block set
  3. AQ55789 GO! QUBE Mix & Match – 8” Companion set – Angles
  4. AQ55137 GO! Cutting Mat 6 x 6
  5. 10-12 fat quarters
  6. 3m background fabric
  7. 40cm binding fabric
  8. 1.65m x 1.65m backing fabric
  9. 1.6m x 1.6m batting
  10. Rotary mat, cutter and ruler
  11. General sewing equipment

Block 2 Materials:

  1. Shape 1 Square – 3 ½” Finished
  2. Shape 2 Square – 2” Finished
  3. Shape 8 Rectangle -2” x 3 ½” Finished
  4. Shape 13 Triangles In Square – Centre – 4” Finished
  5. Shape 14 Triangles In Square – Sides – 4” Finished
  6. 3 fat quarters
  7. 10” x WOF background fabric

Cutting Instructions

  1. From print fat quarters:
    • Cut one 4 1/2″ x 4 1/2″ square
      • Using Shape 1, cut one Square
    • Cut one 4 ½” x 4 ½” square
      • Using Shape 2, cut four Square
    • Cut one 5” x 20” strip
      • Using Shape 13, cut eight Triangles In Square – Side (Sides)
  2. From background fabric:
    • Cut one 4 ½” x 4 ½” square
      • Using Shape 2, cut four Square
    • Cut one 4 ¾” x 8” strip
      • Using Shape 8, cut four Rectangles
    • Cut one 5” x 13” strip
      • Using Shape 14, cut four Triangles In Square – Centres (Centres)

Sewing Instructions

NOTE:All seams are ¼“, (6mm), unless otherwise specified

  1. Sew one print Side triangle (Shape 14) to each side of the background Centre triangle (Shape 13). Press seams open.
  2. Petals Block sewing 02 a
    1. Sew each print square (Shape 2) to each background square (Shape 2). Press the seams open.
    2. Sew a background rectangle (Shape 8) to each unit from step 2. Note the orientation on the diagram below.
    Petals Block 2 step 3
    1. Arrange the units to create the block layout, and sew into rows. Press seams open.
    2. Sew the rows together. Press seams open.
    3. Congratulations on finishing Block 2 of petals!

About the Author

Share this Article

2 responses to “Petals Block Of The Month #2

  1. Julie says:

    Hi , just wondering if the centre of block 2 is cut with #6 square on point and #5 triangles as photo looks like all same fabric ?

    1. Debbie Lomas says:

      Hi Julie,
      Yes there is an error. The centre is one complete square. Thank you for alerting us and we will amend the notes and re-upload.
      Debbie

Leave a Reply

Your email address will not be published. Required fields are marked *